Shop and Buy The New WLA-115 LOUDSPEAKER Online on Irukka.com
Wharfedale Pro WLA-112 Line Array Loudspeaker | WLA 1 System
COAXIAL FULL RANGE
The 12” and 15” elements use coaxial drivers from Beyma – which are manufactured in Europe.
This coaxial design gives consistent coverage on both Horizontal and Vertical planes – while competitive traditional two-way line arrays do not have consistent coverage in one axis at least by design.
WLA-1 coaxial design gives consistent coverage and is unique.
WLA-1 System gives constant coverage on both Horizontal and Vertical planes
Competitive traditional constant curvature two way systems do not have consistent coverage in one axis at least by design.
HYBRID CURVATURE ARRAY
With a traditional 2-way array….arrays of 6 elements or more are simply not practical.
With the WLA-1 Hybrid Curvature design, arrays of up to 6 elements can be configured.
EVO-FOLD
EVO-Fold reduces the usual phase issues that traditional 2-way line arrays have due to them having the drive units physically some distance apart in the array. One specially-designed coaxial mid-high frequency driver is loaded to a unique EVO-Fold horn. The EVO-Fold horn combines a unique folded and manifold design. The most advanced FEM technology has been used to create this.
The high-mid energy exits produce a uniphasic sound in the widest range of frequencies. And visually, the detail of the EVO-Fold waveguide is a work of art.
DEPLOYMENT CHOICES
1
Configure vertically and deploy as a ‘traditional’ flying array.
The optional WLA-1 Common Fly Frame ensures stability and that flying is easy.
2
The optional SP-4 pole easily connects the 21″ sub to the tops. Dual angle 35 mm pole sockets in the full range elements makes angle adjustments safe and easy.
3
Configure a horizontal flying array.
The optional WLA-1 Link hardware connects three elements of either WLA-112 or WLA-115 to create a 3 unit horizontal array with 60 H x 100 V dispersion
TALK ABOUT ANGLES
WLA-1 introduces a new Hybrid concept giving variable angles of 0, 5, 10 and 15 degrees.
Easily adjusted using the integral rigging brackets.
OPTIONAL COMMON FLY FRAME
Configure the system how you like with the WLA-1 Common Fly Frame.
Subs at the top ? WLA-115’s or WLA-112’s. The Common Fly Frame supports all the different models in the WLA-1 series.
WLA 115 Fly Frame
SPECIFICATIONS OF WLA 115 LOUDSPEAKER SERIES
| Model Name | WLA-115 | |||
|---|---|---|---|---|
| Design | Hybrid Curvature Array | |||
| System Type | 15″ coaxial passive | |||
| Configuration | two-way | |||
| Frequency Response (+/-3 dB) | 42 Hz – 20 KHz | |||
| Frequency Range (- 10 dB) | 25 Hz – 25 KHz | |||
| Sensitivity 2.83 V/1 m | 102 dB | |||
| Calculated Maximum SPL @ 1 m | 135 dB | |||
| System Peak SPL | 141 dB** | |||
| System Rated Impedance | 8 Ω | |||
| * | ||||
| ** | level at 1 m under free field conditions using pink noise with crest factor 4, with dedicated preset. | |||
| Low Frequency Transducer | ||||
| Size | 388 mm / 15” | |||
| Voice Coil Size | 101.6 mm / 4.0” | |||
| LF Frame Material | Aluminium | |||
| High Frequency Transducer | ||||
| HF Driver Type | Compression Driver | |||
| Coil Size (mm / inches) | 72.2 mm / 2.87″ | |||
| Exit Size (mm / inches) | 38.1mm / 1.5″ | |||
| Diaphragm Material | Composite titanium / polyester | |||
| Waveguide Type | EVO-Fold® | |||
| Nominal Coverage (HxV) | 100° x 20° | |||
| Special Features | Copper Demodulating rings in both LF and HF units | |||
| Waterproof LF cone | ||||
| Shared High performing Ferrite magnet system design | ||||
| Power(AES2) | ||||
| System Continuous Power (W) | 500 | |||
| System Programme Power (W) | 1000 | |||
| System Peak Power (W) | 2000 | |||
| 1.2 KHz | ||||
| Recommended HPF = BW 18 dB/oct. | 25 Hz | |||
| Input Connector | 2 x speakON compatible | |||
| Rigging & Hardware: | 3 points for rigging | |||
| Vertical Splay angle range: | 0°- 5° – 10° – 15° | |||
| Horizontal Splay angle | 15° | |||
| Optional Accessories | WLA-1 Common Fly Frame | |||
| Hardware | WLA-1 Link | |||
| Stand pole: | Dual Angle -2.5° / + 7.5° | |||
| Handles: | 2 side / 2 back | |||
| Enclosure | ||||
| Cabinet Type | Trapezoid | |||
| Enclosure Material and finish | 15 mm plywood / Rhino Rock | |||
| Colour | Black paint | |||
| Grille Material & Finish | Powder coated perforated steel | |||
| Dimensions – Unpacked: | ||||
| Height Front | 408 mm / 16.1″ | |||
| Height Rear | 302 mm / 11.8″ | |||
| Width | 566 mm / 23.4″ | |||
| Depth | 543 mm / 16.5″ | |||
| Dimensions – Packed: | ||||
| Height | 661 mm / 26.0″ | |||
| Width Front | 630 mm / 24.8″ | |||
| Width Rear | 630 mm / 24.8″ | |||
| Depth | 490 mm / 19.3″ | |||
| Weight | 34.5 Kg | |||
| Gross Weight | 37.5 Kg | |||
