WLA-28SUB Passive Subwoofer Speaker
Get the WLA-28 Subwoofer on Irukka Online
Features of WLA-28 Subwoofer
- Dual 15″ LF drivers with 4.0″ voice coils
- 145 dB Max SPL
- 15 mm / 18 mm Birch plywood construction
- Integral rigging system
- 1200 watts AES (RMS)
- 2400 watts Programme
- 4800 watts Peak
- 4 Ω impedance
OPTIMISED GROUND STACKING
WLA-28X rigging doubles up as an optimised ground stacking system, using the WLA-28SUB subwoofer as a base.
OPTIONAL FLY FRAMES
Arrays can be assembled using only WLA-28X line array elements or with WLA-28SUB Subwoofers at the top of the array.
The WLA-28X Common Fly frame supports up to 12 x WLA-28X elements and a WLA-28SUB.
WLA-28SUB
BI-AMP & PASSIVE MODES
In BI-AMP mode, two power amplifiers can be used. This gives you the advantage of being able to select the best power amplifier specifications for each driver inside the loudspeaker. In a BI-AMP configuration, an external crossover is used to separate the frequencies and this splits the signal to the dedicated LF amplifier and the HF amplifier. This way, each amplifier is only working on the given frequency range and, in turn, is powering the corresponding driver inside the loudspeaker.
In PASSIVE mode, a single amplifier can be used to power all drivers inside the loudspeaker. The full frequency range is put into the loudspeaker and the loudspeakers’ internal crossover separates the frequencies, delivering the right frequencies to the right driver. In the example of a 2-way passive loudspeaker, this means that the single amplifier is powering both the HF compression driver and the LF transducer. The internal crossover takes care of both the frequency and power separation.
SPECIFICATIONS OF WLA-28SUB PASSIVE SPEAKER
| Model Name | WLA-28SUB | |
|---|---|---|
| System Type | Passive | |
| Configuration | 2 x 15″ subwoofer | |
| Frequency Response (+/-3 dB) | 39 Hz-900 Hz | |
| Frequency Range (-10 dB) | 39 Hz-1.5 KHz | |
| Sensitivity (2.83 v / 1 meter) | 108 dB | |
| Calculated Maximum SPL @ 1 meter | 145 dB | |
| System Rated Impedance | 4 Ω | |
| Low Frequency Transducer | ||
| Size | 2 x 381 mm / 15” | |
| Voice Coil Size | 100 mm / 4” | |
| Rated Impedance | 2 x 8 Ω | |
| LF Power (re:AES2-2012) | 2 x 600 W | |
| Power | ||
| System Continuous Power | 1200 W | |
| System Programme Power | 2400 W | |
| System Peak Power | 4800 W | |
| Crossover frequency | No | |
| Input Connector | 2 x speakON compatible | |
| Hardware | Integral side plate non adjustable |
|
| Enclosure | ||
| Enclosure Material | 15 mm,18 mm Plywood | |
| Finish | Rhino Black Paint | |
| Grille Material & Finish | 1.2 mm Black Steel | |
| Dimensions – (Unpacked) | ||
| Height Front | 485 mm / 19.1″ | |
| Height Rear | 485 mm / 19.1″ | |
| Width | 760 mm / 29.9” | |
| Depth | 716 mm / 28.2” | |
| Dimensions – (Packed) | ||
| Height | 850 mm / 33.5″ | |
| Width Front | 575 mm / 22.6″ | |
| Width Rear | 575 mm / 22.6″ | |
| Depth | 806 mm / 31.7″ | |
| Weight | ||
| Net Weight (kg / lbs) | 61.2 kg / 134.6 lbs | |
| Gross Weight (kg / lbs) | 66.0 kg / 145.2 lbs |
